Cool Roof Store Acrylic Coating

Product Description

Cool Roof Store Acrylic, is a tough,  highly flexible, white acrylic roof coating. This high performance product resists cracking, peeling and mildew, while offering tremendous durability and long term life.

It expands and contracts with the roofs movement to resist damage. The coating provides an excellent, highly protective barrier which reflects the suns heat and destructive UV rays.

In turn, this helps to cool surfaces and leads to a reduction of interior temperatures. This product is an “investment”, and can actually pay for itself in savings on cooling costs! Do Not Allow Stored Product To Freeze.

Clean-up

Clean tools with soap and water.

Features

  • Reduces heat build-up
  • Thick “high hide” formula
  • Expands and contracts up to 300%
  • Helps reduce cooling costs

Can Be Used Over:

  • Cement Tile (Flat or Barrel)
  • Metal Roofs (aged Galvanized)
  • Asphalt Shingle Roofs
  • Aged Roofs previously coated with
    asphalt, aluminum, or tar.

Precautions

DO NOT allow product to freeze. Protective clothing and eyewear should be used during the application of these products. When transporting this product, ensure that lid is tight and pail secure and upright.

DO NOT allow pail to tumble as this may cause lid to loosen and leakage to occur. DO NOT store at temperatures above 110°F. Close container after use. DO NOT reuse empty containers.

Not for use on EPDM or some single-ply membranes. Do not use in drinking water or food systems.[/box]

For Exterior Use Only

Use with adequate Ventilation Keep Out of Reach of Children VOC/VOS-20g/l max. (0.171bs/gal.) CALIF. PROP. 65 • CHEMICAL WARNING (CALIFORNIA HEALTH AND SAFE1Y CODE #25249.5 ET SEQ).

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or reproductive harm. Use proper protection and adequate ventilation, when using product. CAUTION!: HARMFUL OR FATAL IF SWALLOWED. SKIN AND RESPIRATORY IRRITANT.

If swallowed DO NOT induce vomiting. Call a physician immediately. In case of: Eye contact -flush with large amounts of room temperature water for 15 minutes.

Skin contact-wash thoroughly with soap and water. Irregular or stopped breathing; administer oxygen, give artificial respiration. Get medical attention (immediately). Avoid prolonged breathing of vapor or spray mist. (NIOSH/MSHA TC 23C or equivalent).

Warranty & Disclaimer

Cool Roof Store Acrylic is guaranteed to form a protective coating to your roof. for a period of seven (7) years from the date of purchase. This warranty is only applicable when this product is applied according to our directions, in two coats, and used with other Cool Roof Store products. This warranty does not c:over flat roofs, or poor drainage surfaces where ponding water exists. All surfaces must maintain a minimum slope of1 • per foot {5°), to be eligible for warranty. If the coating does not perform as stated during the guarantee period, we will provide, with sales receipt, the original purchaser with replacement coating to repair the affected part of the roof. Failures due to acts of God, fire, structural defects or causes beyond our control are excluded from this guarantee. We are not responsible for any labor, property or other consequential damages or costs incurred in the original or any replacement application. Except as stated above, we make no warranties or guarantees, expressed or implied, and none should be inferred.

Typical Physical & Performance Characteristics

Weight Per Gallon 12lbs.
Solids by Weight* 6696
Solids by Volume* 5496
Viscosity (ASTM D-26g7) 110-140 ku
Elongation (ASTM D-562) 46396
Tensile Strength (ASTM D-2370) 365 psi.
Elongation, post weathering (96) 13196
Reflectivity (ASTM C-154g) .9o (Initial) .77 (3 yr.)
LEED Emissivity (ASTM E-408) .95 (Initial) .g4 (3 yr.)
CRRC Emissivity (ASTM c-1371) .87 (Initial) .go (3 yr.)
LEED SRI (Oak Ridge Calculator) 115
Permeability (ASTM D-1653) < 5 perms
Adhesion to Polyurethane Foam 4.1lbs.jin.
Consistency Brush, Roller or Spray
Skin Time (so96 Relative Humidity, 70°F) 4 hours
Full Cure (so96 Relative Humidity, 70°F) 24-36 hours
Application Temperatures 55°F and rising
Flammability N/A (water based)
Clean-up Tools Warm water and soap

“NOTE: Percentages listed are + or -3%

Get Started Coating Your Roof!

Contact us now by using the form below or call us at (808) 591-1900. We’re happy to answer your questions. You can also read about our Roofing Services on Oahu for every kind of roof.

Cool Roof Store

Can your Roof Primer Do This?
  • Block Asphalt Bleedthrough
  • Seal up bare wood
  • Stop your roof leaks — 100%
  • Waterproof
  • Thick, flexible base coat for silicones
  • Stretches 300%
  • Can be left exposed for 7 years without re-coating
Can be used over:
  • Block Asphalt Bleedthrough
  • Seal up bare wood
  • Stop your roof leaks — 100% Waterproof
Not Recommended over:
  • Block Asphalt Bleed through
  • Seal up bare wood
  • Stop your roof leaks — 100% Waterproof

Want to do it yourself?

LeakMaster Roofing purchases all their roof coatings from the Cool Roof Store. Learn how to install your own at one of their seminars.

Contact Us Now

Fast Free Estimate

Call Now ButtonCall Us Now